The only ones able to find a needle in a haystack.

The specific scanners for clothing/furs industry

MM700/MM1600V are X-ray scanners, specifically studied for clothing/furs industry, that allow to detect foreign objects or defects in the product under examination.

MM700/MM1600V are automatic non-destructive inspection systems that automatically check product compliance to the company’s quality standards and report any defects or abnormalities.

MM700/MM1600V are control systems that work either integrated in the production line or at the end of the same as well as in the centers where the finished products are received.

MM700/MM1600V deliver countless benefits automatically, signaling the defective product with an audible or bright alert

Detect and report automatically:

• Any fragments of broken needles during seam (min. diam.0.8/0.4/0.2 mm) with a ZOOM function for punctual inspection

• Any forgotten staples or fixing pins (min. diam.0.8/0.4/0.2 mm) with a zoom function for punctual inspection

• the lack of one or more components within the product to be inspected (eg number of eyelets / buttons / hooks);


• the authenticity of the product and the batch of production (by a microscopic signal of
• compliance with production specifications (eg double stitching, dim.of stitching margins/ edges dim. etc.) according to the requirements using the “ruler” function

MM700/MM1600V can also:
• be equipped with a barcode reader for the automatic (optional) identification of the product to be controlled with recall of related checking program and uniquely  traceability of the saved image;
• Store images of all production and create statistics on daily and regular defective product percentages


• Do not contain radioactive material, X-rays are produced with a generator powered by electric current;
• have a  software interface with intuitive icons and symbols on a large monitor that makes  programming easy and fast  even for an inexperienced operator;
• at the time of installation, a training course is provided for the staff responsible for its use

Require minimal maintenance;

• are ready for online support and can be programmed, assisted, and so on. from our factory in Vigevano via Internet;
• are predisposed to interfacing and exchanging data with other machines or other factory phases/sectors
• Allow customization of other functions on a specific customer request

The Plus:

  • Station consisting of all in one PC of the latest generation with touch screens, 23 “or higher monitor for complete viewing of the image, keyboard and wireless mouse for easy and immediate management;
  • exceptional image quality at very high speeds;
  • Compact dimensions;
  • HDI: The new “NONAME Hi-Tech” software for detecting potentially hazardous bodies such as nails, staples, etc., guarantees the highest level of performance;
  • EASY GUI: The new icon and symbol operator interface allows also for untrained personnel to set up the inspection of a new product in very short time.


Technical features

  • Working environment: 5ºC to 35ºC, RH 0-90% (no condensation)
  • Protection level: IP 44
  • X-ray source: 90 kV, 200 W – High resolution
  • Processor: All-in-one PC 23 “PC, latest generation Core
  • Pre-processing and control unit: “NONAME Hi-Tech” HDI acquisition system
  • Monitor: 23 “, 16: 9, Full HD 1920×1080, LED backlight with touch screen
  • Keyboard and mouse: Wireless
  • Interface: USB / Ethernet
  • OPT: Bar Code Reader
Specific features   MM700  MM1600V 
Total time control cycle sec. 3-4  15
Inspectable dimensions cm 115 x 115 x 210 (h) cm  160x80x40
View of inspection Single  Double(inclined xx °)
Resolution mm 0,4 (0,2 on rich.)  0,8 (0,4 on rich.)
Monitor Single 23″  Dual 23″ + 40 “
Dimensions cm 240x75x155h 200x160x220h
Weight kg. 600 1900

MM700/MM1600 have the features of INDUSTRIA 4.0

MM 700

The new line of X ray inspector scanner for shoes industry.

The increasingly stringent quality control in the shoe industry , is attracting the interest of companies to an accurate non-destructive analysis aimed at the detection of defects/metal objects such as nails or staples etc.

The X-ray technology, already widespread in other areas such as food, pharmaceutical, automotive, etc., is able to cover a wide range of applications, enabling the detection of foreign objects for the verification of completeness of the product.

“NONAME Hi-Tech” has created a new line of products with innovative design, an advanced mechanical, performance and intuitive software, a clear strength and extreme ease of use.

The latest technologies used enable the new machine series MM 700 delivers outstanding results with respect to both the detection of foreign bodies and the check of conformity of the inspected  products.

The modular hardware and the wide range of features and customization software enable the machines of the new series MM 700 to adapt to the needs of any type of customer. The management of post-sale machines Series MM 700 is performed through an extensive international organization of service and provides the opportunity for customers to get in touch with the technicians “NONAME Hi-Tech” via a remote assistance service accessible directly from the machine’s software.

– Control: PC station consists of all in one of the latest generation touch screen monitor 22 “or higher for a total vision of the image, wireless keyboard and mouse for a machine management by highly qualified personnel.
– Source X-ray high quality: the small focal spot and the oil cooling system x-ray allow you to maintain superior performance for a long time.
– Ultra fast and highly sensitive linear receiver: The new generation of receivers allows  to have an exceptional image quality even at high speed. The dynamic 14 bit allows the viewing of any type of product.
– Compact size: The use of advanced components and careful design have enabled the development of a compact and efficient machine.
– Scan speed: up to 600mm/s.
– Oil cooling the X-ray tube: The oil cooling allows the machine to operate in a wide range of temperatures without risk and without problems.

HDI: The new software ” NONAME Hi – Tech ” for the detection of potentially dangerous bodies such as nails , staples , etc. . It provides the highest level of performance.
– Filtering: the new filtering technology allows for sharp images and without increasing the noise performance of the machine.
– Processing with macro: processing with macro enables increased performance of the inspection.
EASY GUI: the new operator interface icons and symbols allows even inexperienced staff to set-up the inspection of a new product in a very short time.
– Lack of components: HDI is able to detect a lack of one or more components inside the product.
Technical features:
– Working place: from 5ºC to 35ºC, RH 0-90% (without water)
– Protection level: IP
– Linear received: 0.4 mm resolution – 0.2 mm on request
– X ray generator: 90 kv ,200 W – High resolution
– Processor: PC all in one touch screen 22”, Core latest generation
– Pre-processing and control unit: system “NONAME Hi-Tech” HDI
– Monitor: 23″, 16:9, Full HD 1920×1080, LED-backlight touch screen
– Keyboard: Wireless
– Interface: USB / Ethernet
– OPT: Bar code reader
– OPT: Bar code printer

 Caratteristiche tecniche  MM 700-40 MM 700-50
Dimensions 240 x 75 x 155 (h) cm 265 x 75 x 165 (h) cm
Speed Max. 600 mm/s Max. 600 mm/s
Max dimensions of inspected item 70 x 30 x 20 (h) cm 70 x 50 x 25 (h) cm
Max weight of inspected item 15 Kg 15 Kg
Feeding voltage 230 V ac 230 V ac
Frequency 50/60 Hz 50/60 Hz

AB 160

Products detectable can be of different shapes and dimensions (for ex.uppers, soles, heels, insoles, shoes/boots also already in the box, handbags etc.). A conveyor belt, interfaceable with a present production line, allows the pieces entrance into the equipment.
The system presents advanced hardware and software solutions with a simple and adaptable mechanics. AB 160, thanks to accuracy and shielding redundancy, can be installed in standard industrial places without any precaution against x-ray flassibile.

Typical applications:

– Product anomaly identification, for ex. presence of smithereens of broken needles during sewing, insole fixing nails or staples, tacks/nails not bent during lasting etc. etc.

– Production standard conformity checking, for ex.tacks/nails absence or tacks quantity for heel attaching, insole shank position and dimensions, etc. etc.

– Checking of product authenticity and identification of production lot.

CONTROL SOFTWARE. specialized software for a complete diagnostic system with the following functions:
– Allarm control.
– X-ray generator management.
– X-ray detector monitoring.
– Automatic sensor adjusting.

HARDWARE. AB 160 has a last generation hardware structure. Easy to use thanks to simply user interface. The test objects are displayed on high resolution 19″  LCD monitors to minimize operator eyestrain.
USER INTERFACE. by means of graphic object buttons available on monitor, the user can control all the necessary functions for the machine operating.. The parameters and the digital informations allow an easy and intuitive system operations execution.

Suitable to inspect different kind of objects such us shoes, leather items, metal of light alloys, food etc.etc.
Features and technical specifications
Dimensions 260 x 80 x 155 (h) cm
Net weight 600 Kg
Electrical power 230 V, 50 hz
Monoblock power 200 W
Max power required 1,5 kW
Max dimensions of inspectionable object 600 x 300 x 250 mm
Product viewing mode continuos scanning
Max belt speed 40 cm/sec
Sensor width 512 mm
Pixel numbers 1024
Scanning resolution 0,4 mm
Data processing PC Pentium IV
Operator interface monitor LCD 19″