PTP 995MA

**New TOP 7 Display Touch Screen**

Automatic electronic heel nailing machine for unit soles.

The PTP 995MA is an automatic, pneumatic, electronic heel nailing machine purposely designed for soles factories in order to full fill all the working requirements. The machine is available also in oleodinamic version PTO 995 MA. Is is equipped with hold-downs for high and flat heels and with 3 nailing forms easily interchangeable (working change requires a few seconds).
The loader is with 10 nails from 6 to 20 mm. (divided into 2 sections) equipped with 2 sensors (till 8 by request) for the automatic detection of nails lackage or loading troubles; there is a device for the automatic nails discarge useful whel, due to a working change, a nails length different from the one in use is required.
The cycle start control is given by a feeler placed in the pincer and acted by the rear part of the sole. This pincer assures to center the sole checking the correct position on the nailing form before activation of nailing and lateral discharge. During the whole cycle of clamping, nailing and discharging, the working area is safeguarded in the front and side by protection plexiglasses.
The weltpressuring device is made by a plate which is selfadjusting in height for the different thickness or for the soles without welt and acts with a pressure adjustable from the command panel. It is also adjustable from the panel the power of nailing drivers which can be reduced for soft material soles or increased for hard material soles. The drivers position is adjustable either for the outcoming/penetration into the sole during nailing either for the different length of nails.
In case the nails are jammed during the pipes/nailsblock/nailing form loading, the release is prompt and automatic. The heel clamping is made by an oleodinamic cylinder (adjustable power) with a fast approach movement and by a wide regulation pressing run, in order to avoid braekages in thin heels and having enough power to press big heels.
The high speed allows a productivity of 500/600 pairs per hour according to the different working types. The machine is equipped with all the safety measures required by present law and particular attention has been given to energy saving.

Features ang technical specifications
Dimensions 92 x 85 x 210 (h) cm
Net weight   Kg 450
Transformer 160 W
Electrical system   24 V
Feeder 10 nails
Nails length from 6 to 20 mm
Output in 8 hours up to 4800 pairs